Stonework Mesquite Concrete and MasonryStonework Mesquite Concrete and Masonry

Driveway pavers in Mesquite TX - a drive that sits flat under your cars

Cracked concrete or a drive that holds puddles? We build paver driveways on a packed stone base with drainage planned for your lot.

Broad gray paver driveway curves around a palm tree set in a circular planted island.
  • Licensed and fully insured.
  • Free estimates at your property.
  • We reply within 1 business day.

What goes into a paver driveway in Mesquite, from tear-out to the last paver?

A paver driveway in Mesquite is a surface of interlocking concrete pavers laid over a packed stone base. It's built to carry your cars as well as foot traffic, so the same pavers can run from the drive into the walkways beside it. The job usually starts with tearing out the old surface and digging down, and on many lots it comes with drain pipe, edging and sometimes a short wall where the yard slopes.

Most folks call us when the old concrete drive is cracked, tipping or holding water and they're wondering if pavers are worth it. The price moves with the size of the drive, whether old concrete has to come out, how deep the base needs to go on your lot, whether drain pipe goes in, the paver and pattern you pick, and any sidewalk work at the street. The schedule turns mostly on weather, because we won't build a base on soaked ground, and on any permit the city needs, which we file and follow for you. When I come out, the estimate lays out your price with your options side by side.

How do you know your driveway is ready for pavers?

  • Cracks across the slab

    Long cracks, or slabs that have tipped up at the joints, usually mean the ground or the water under the concrete has moved. Every crack lets more rain in underneath, so the pieces keep shifting and the edges turn into a trip spot.

  • Water standing after rain

    Puddles that sit for a day tell you the drive slopes the wrong way or the base has settled in low spots. Standing water keeps soaking the ground below, and soft ground is what lets a drive sink further.

  • Ruts where the tires go

    On an older paver drive, two dips running where you park usually mean the base was too thin or has washed out. Pavers can often be lifted and reset, but the longer it goes, the more of the base has to be rebuilt.

  • Retaining wall construction

    If your drive cuts into a sloped yard, a short retaining wall holds the soil back so it doesn't wash across the new pavers.

  • Masonry restoration

    When the brick steps, porch or columns beside your drive look tired, restoring them helps the older masonry look like it belongs next to the new pavers.

How we build a paver driveway

What sits under a paver driveway matters more than what's on top, so before we ever talk colors I walk you through the base and the drainage plan. It's like cooking, where the prep decides the dish. Our crew has the underground lines marked, tears out the old surface, digs down to firm ground and packs the stone base in layers so it won't settle in the middle. We use pavers made to carry cars, not big thin slabs, then set the edging so the field can't creep, fill the joints and compact the whole surface. Before we leave, we sweep up and haul off the debris, because a clean site is a habit I won't give up.

A new drive often brings the rest of the front yard into question. If your drive runs along a slope, we can add retaining wall construction to hold the yard back. If the brick around your entry has seen better days, masonry restoration brings it back so the house and the new drive look like they were done together.

  • Interlocking paver drive

    This suits most homes, where rain runs off the surface to the edges. The pavers are made to carry cars and sit on a packed stone base, with drain pipe added where the soil is clay or drains slowly.

  • Permeable paver drive

    This suits you if you want rain to soak down through the drive instead of running off it. It isn't used where groundwater sits within 2 feet of the bottom of the pavement, and the joints need regular cleaning to keep water draining through.

Get a free estimate for your paver driveway

We reply within 1 business day to set up a free visit at your property, with no obligation. Prefer to talk it through? Call (972) 402-6919.

Call (972) 402-6919

Why Mesquite homeowners call Stonework Mesquite Concrete and Masonry for pavers

  • The owner walks your job

    I come out to look at your drive, answer your questions and put the estimate together, and a crew of trained masons does the work. I check in on site and walk the finished drive with you, so the person who quoted the job sees it through.

  • Since 2013, with clean sites

    We've been in business since 2013, and the kitchen habit I brought with me still runs every job. Your yard gets swept and the debris hauled off before we leave for the day, so you're not living in a mess.

  • Licensed, fully insured, permits handled

    We're licensed and fully insured, and that matters here because the city requires a professional license before anyone can get a building permit. When your drive needs one, we file the application with the city and line up the inspections.

  • Planned where it meets the street

    The city caps the slope where a drive meets the street or alley at 12 percent for single family and duplex homes. If your drive crosses a sidewalk, that stretch gets torn out and rebuilt with the drive within Texas accessibility limits, so I measure for both on the first visit and check the current rules with the city.

On a driveway, the part you never see decides how long you'll like the part you do, so call us or send a request and let's look at your lot together.

What happens after you call about a paver driveway in Mesquite?

  1. Call or send a message

    Call (972) 402-6919 or use the form, and we'll set a time to come look at the drive. Tell us roughly how big it is and what's wrong with the one you have now.

  2. I walk the drive with you

    I look at the slope, the soil and where water goes, point out what I see and give you an estimate with your options laid out plainly. You'll see what the tear-out, base, drain pipe and pavers each add, so you know where the money goes.

  3. Our crew builds the drive

    Once any city or county steps are done and the underground lines are marked, our masons tear out, build the base and lay the pavers. I check in on site while the work is going.

  4. We walk the finished drive

    Before we pack up, I walk the drive with you and show you what we did underneath and why. I also point out what to keep an eye on, like the joint sand and the edges, so you know what to watch over the years.

Common questions

  • What is the best way to pick pavers for a driveway that holds cars?

    Pick interlocking concrete pavers, because they're made to carry cars as well as foot traffic. Thinner, larger paving slabs aren't suited to a driveway, since they can flex and crack under the weight. If you like the big-slab look, I'll show you car-rated pavers that come close.

  • Does clay soil change a paver driveway job?

    Yes, drain pipes are recommended where pavers that carry cars sit on clay or other slow-draining soil, so water has a way out of the base. We plan that pipe in from the first visit, because adding it later means pulling the pavers back up.

  • How much does a paver driveway cost in Mesquite, TX?

    Installing driveway pavers across the US usually costs about $18 to $23 per square foot, and that's the market's range, not a quote from us. Where your job lands depends on tear-out, base depth, drain pipe and the paver you choose, and the estimate at your property gives you your own number.

  • How do I compare two quotes for a paver driveway?

    Ask each contractor how deep the stone base goes and which paver thickness they're using, because that's where quotes for the same drive usually split. Base depth is set site by site, with soft ground and heavy traffic calling for more, so a lower price can mean less stone underneath. Industry guidance pairs driveways with thinner pavers than streets, so ask whether the thickness quoted fits a home drive.

  • Who can get a building permit for a driveway in Mesquite?

    Mesquite building permits go through the city's Citizen Self Service system, which is open to licensed contractors and to homeowners who own, live in and homestead the home. Whether your drive needs one is the city's call, so we check with them before any work starts.

  • Can I put in a circular driveway in Mesquite?

    You can, but the city's traffic engineering manager has to approve every circular driveway at a single family detached home. A circle adds a second spot where the drive meets the street, so we ask for that approval early and check the current rule with the city first.

Get your paver driveway planned from the base up

Have the drive's rough size in square feet handy and tell us if it crosses a sidewalk or loops around, so the first visit starts with the right questions.

(972) 402-6919Request a quote