Masonry Contractor in Seagoville, TX - Brick and Stone Work That Fits Your House
Stonework Mesquite Concrete and Masonry is a masonry contractor based in Mesquite, TX, and we work across Seagoville. We repair worn brick, mortar and chimneys and build retaining walls, walkways and stone veneer that fit the house.
- Licensed and fully insured.
- Free estimates at your property.
- We reply within 1 business day.
Brick ranches and roomy lots in Seagoville
Seagoville is a short drive from our base in Mesquite, and it has a small-city feel, with quiet residential streets and more yard around each house than you'd find in denser cities. Many of the homes we're called to are brick ranch houses with a few decades on them, where the mortar has worn back, a chimney needs attention or a few bricks have cracked. On newer streets the calls lean toward new work, like a retaining wall, a walkway or stone added to a plain front. We do the same mix of work in Balch Springs, so these houses look familiar to us.
That mix shapes how we work here. On older brick, a repair has to blend with what's already there, so most of the job is matching. On a roomy lot there's space to build, so the bigger questions are where the wall or walk goes and how it meets the house and the yard around it.
Working in Seagoville: permits, paperwork and what sets the price
In Seagoville, permits for construction come from the city's Building Inspection Department, and when a job needs one, the work can't start until it's issued, so I put the permit at the front of the schedule. The city also processes contractor registration along with permit applications. We take care of that application with the city and line up the inspections, and we're licensed and fully insured.
What moves the price here is mostly the size of the job, the brick, stone or block you pick and how much old work has to come out before new work goes in. The schedule turns on whether a permit is needed and how long matching materials take to arrive, and at the estimate I lay out your options with what each one costs. Our crew also works in Heartland and other cities around Mesquite, so Seagoville is close to home for us.
Get a free estimate for your Seagoville masonry job
Send the form or call (972) 402-6919, and we'll get back to you within one business day to set a time. I come out to your Seagoville house myself, look at the work with you and lay out your options in plain words. The estimate is free and obligation-free, so you can take your time deciding.
Call (972) 402-6919Services in Seagoville, TX
Brick repair
Older brick houses here often show a few cracked or flaking bricks. We cut them out and set matching brick so the repair blends in.
Tuckpointing
Joints on older brick walls wear back and turn sandy, letting water in. We rake out the tired mortar and pack in a matched mix.
Retaining wall construction
Bigger lots leave room for a level patio or raised bed, held by a retaining wall. We build block or stone walls with drainage behind them.
Stone veneer installation
A plain brick front can get a fresh look with stone. Our stone veneer installation sets thin stone on the wall you have, so nothing gets torn down.
Chimney repair
Chimneys on older houses often show a cracked crown, the concrete cap on top, before the walls do. We refill loose joints and pour a new cap.
Walkway construction
With deeper front yards, plenty of homes here have a cracked path or none at all. We build brick, stone or paver walkways on a packed base.
How it goes when you call us from Seagoville
Call or send a message
Tell us what you're seeing, whether it's a crumbling joint, a tired chimney or a wall you've been planning. We call back to set a time that suits you.
Walk the job with me
I come out myself, look at the brick or the yard with you and point out what I see. You get your options and what each one costs in plain words before you decide anything, so it helps if you're home.
Our crew does the work
We take care of any city steps first, then a crew of trained masons does the work while I check in on site. We keep the site tidy as we go, the way you'd clean a kitchen during service.
Walk the finished job together
Before we pack up, I walk the finished work with you and explain what we did and what to keep an eye on later. Every job is backed by our satisfaction guarantee.
Common questions
How do I know if my masonry project needs a permit in Seagoville?
The surest way is to ask the city, and the city's permit FAQ says to call the Building Inspections Department at 972-287-6829 when it's unclear. That FAQ says cosmetic work like painting, wallpaper, carpet, cabinets and trim needs no permit, while permits cover constructing, remodeling or enlarging a building and other property improvements. Where a job falls isn't always obvious, so we check with that office before any work starts.
Does a retaining wall need a permit in Seagoville, TX?
Yes, the city's FAQ says all retaining walls need a permit, and a wall over 48 inches tall also needs engineered plans and design. The same FAQ says any accessory or storage building needs a permit too. On a wall over that height, the engineered plans come first, before any digging.
What building codes does Seagoville use for masonry work?
Seagoville currently works from the International Code Council's family of codes, with its own city amendments, and its inspectors enforce city and state codes on all buildings and structures in the city. Those codes cover construction, alteration, repair, demolition and maintenance, so repair work falls under them as well as new building. We build to those codes.
How much does masonry work cost in Seagoville, TX?
Each masonry job in Seagoville is priced from what I see on site, so you get your figure at the estimate instead of a guess over the phone. Matching older brick, walls that are hard to reach and a retaining wall tall enough to need engineered plans all push the cost up. A simpler material, or fixing the urgent part now and leaving what can wait, brings it down.
What is the best way to fix crumbling mortar on a brick house in Seagoville?
The usual fix is tuckpointing, where we rake out the worn mortar to sound material and pack in fresh mortar matched to the old in strength and color. Mortar should be a little softer than the brick so the joint takes the wear instead of the brick, the same way a good sauce suits the dish instead of fighting it. If only a few joints are going, I'll tell you whether the rest can wait.
Can you match the old brick on my Seagoville house when replacing damaged bricks?
Usually, yes, though on an older house a perfect match isn't always possible, and I'll tell you at the estimate how close we can get. We look for brick in the same size, color and texture, sometimes borrowing a few from a hidden spot on the house. The mortar color matters as much as the brick, so we match that too.
Plan your Seagoville masonry project with us
Call (972) 402-6919 or send the form, and tell us what you're seeing so I come out already knowing what to look at.